Using Injection Foams and Bait Stations For Termite Control

If you suspect termite infestation in your home, you should hire a professional pest control company to carry out an inspection and treat the area. DIY techniques may work in the short term, but they don’t match professional tools and chemicals. Injection foams and bait stations are two options, and non-chemical treatments are also an option.

Bait stations

Bait stations are a common termite control option. They are typically installed three to four feet from the foundation of a home, with each station located every 10 to 15 feet around the home’s perimeter. Homeowners can determine the number of stations needed by measuring the length and width of the house’s outdoor walls. Then, divide that number by ten, which means that they would need 30 bait stations for a 300-square-foot house. Bait stations are installed by pushing them into the ground using a shovel or drilling device. Each station should have its own hole.

Bait stations are more effective than surface treatments for termite control. They can be installed by professionals and can provide long-term termite control. Unlike surface treatments, bait stations are designed to destroy termite colonies slowly, instead of eliminating a small population in a short period of time. Bait stations work by infecting the entire colony, rather than eliminating just one worker or reproductive.

Injection foams

Injection foams for termite control are compounds that are applied by injecting them into wood structures exposed to attack by termites. These compounds are injected through drilled injection points. A pressurized container allows for the precise amount of formulation to be delivered and is disposed into a structure to effectively kill termites.

Most termite control products are applied by professionals, but some homeowners can do the job themselves. Injection foams are usually sold in a can, resembling a shaving cream container. A professional pest control company will have a foamer to apply the chemicals. Injection foams for termite control can be just as effective as liquid termiticide. However, it’s more difficult for liquid termiticides to reach the core of a termite colony.

A foam formulation contains active agents that are spread throughout the area being treated, including rim joists, walls, and attics. This method allows for complete coverage of the affected area and provides both initial destruction and protection from future infestation.

Pre- and post-construction liquid chemical treatments

In most cases, a termite treatment requires a liquid chemical to cover the entire surface of the soil. To be effective, these chemicals must be applied evenly and thoroughly. A typical “barrier” treatment can involve hundreds of gallons of solution. If you cannot adequately cover the soil, termites can easily tunnel through the area.

To treat a building, you must first determine the level of infestation. If you are unable to treat the entire building, you must focus on individual areas. Buildings with basements should receive 7.5 liters per square meter of soil. In addition, the chemical should reach the soil surface beneath the built-up part of the foundation.

If you are constructing a new building, pre-construction liquid chemical treatments for termite-control are recommended. During pre-construction treatments, the soil surrounding the foundation of the building is treated with the liquid termiticide. This treatment occurs before the vapor barrier and cement are poured. This treatment will take a few stages. The final phase will be applied after the landscaping is completed.

Non-chemical treatments

There are several options available for drywood termite control that are non-chemical. These include localized application, spot treatments, and whole-structure treatments. Each has its benefits and drawbacks. It is important to research and choose the right one for your home. The best option depends on your budget and the size of your infestation.

Non-chemical treatments involve drilling through the wood of a structure in a “checkerboard” pattern every 12 inches. Although this method is effective, it may not be ideal for environmentally-sensitive areas. The technique also has limitations, including the fact that it may cause damage to wall coverings, structural wood members, and other materials.

Microwave treatments are effective at targeting termite dens. These methods are not toxic to the environment and do not require the use of tents and other chemicals. The best part is that these treatments are cheaper than fumigation methods. You can even do them yourself at home, without having to stay in a hotel. But, make sure you get the job done right. These methods attack both termite eggs and mature adults.

Organic treatments

Using organic treatments for termite control is a great way to protect your home without having to resort to harmful chemicals. Termites are a serious problem and can cost thousands of dollars in damage. While some pests can be avoided by taking preventative measures, termites are particularly damaging to structures and can terminate entire homes. Using a certified, insured company is an ideal way to protect your property.

Essential oils from plants are a great way to kill termites. Orange oil contains D-limonene, an organic substance that kills termites on contact and destroys their eggs. Orange oil is a natural and eco-friendly alternative to chemicals and is also effective against wood-boring beetles and carpenter ants.